Directions:
1.Remove Cover from the Main Body.
2.Insert the Adapter’s connector into the DC Jack input located
on the back of the Main Body. Plug the Adapter into the wall
outlet.
3.Pour bottled or tap water into the Water Tank up to the Max
Water Level Line.
4. Add 5-10 drops of pure essential oil (not included) directly
into the Water Tank.
5. Place Cover on top of Main Body.
6. Button Functions:
1st Push = Continuous mist; no lights
2nd Push = Continuous mist; soft white light
3rd Push = Turns unit off completely
NOTE: The unit will automatically shut off when water level
becomes too low and LED light will turn off.
7. Use only 100% pure essential oil.
TO CLEAN:
Remove Top Cover. Empty the water from the Water Drain
Groove on the side of the Water Tank.
The sensor disc inside the bottom of the unit should not come
in contact with any hard or sharp objects. To remove
possible buildup, gently use a cotton swab dipped in white
vinegar to wipe out the inside.
Dry with a soft cloth to avoid mineral buildup.
Do not use strong cleaning agent
Item Added to Cart
Currently cart is empty
