Directions:
1. Remove Glass Cover from Iron Shell. Remove Water Tank and lift off Splash Guard Lid.
2. Pour tap water into the Water Tank up to the Max Water Level line. Add 2-3 drops of essential
oil (not included) directly into the Water Tank.
3. Replace the Splash Guard Lid onto the Water Tank. Replace the Water Tank by aligning the
Power Symbol with the hole on the bottom of the Iron Shell base. Replace the Glass Cover.
4. Insert the Adapter’s DC connector into the DC Plug input located on the cord extending from
the Iron Shell. Plug the AC end of the Adapter into an electrical wall outlet.
5. Remote Button Functions:
Power:
1st Push = Continuous mist with bright white light (or same light mode as previous shut-off)
2nd Push = Turns unit off completely
Light:
1st Push = Bright white light (or same light mode as previous shut-off)
2nd Push = Soft white candlelight
3rd Push = Light off
Brightness:
1st Push = Soft white candlelight
2nd Push = Bright white light
Mist Mode:
1st Push = Intermittent mist for up to 8 hours, then auto shut off
2nd Push = Continuous mist for up to 4 hours, then auto shut off
6. Power button on bottom of Water Tank:
1st Push = Continuous mist with bright white light (or same light mode as previous shut-off)
2nd Push = Intermittent mist
3rd Push = Turns unit off completely
NOTE: The unit will automatically shut off completely when water level becomes too low.
7. Disconnect Adapter from electrical outlet when not in use.
Item Added to Cart
Currently cart is empty
