Halo Diffuser

Place diffuser on a flat, water-resistant surface.

1.Plug the Connector of the USB Power Cord into the DC Socket on the bottom of the unit.

2. Remove Outer Cover. Remove Water Tank Lid from the Base.

3. Pour tap water into the Water Tank up to the Max Water Level Line. Add 2-3 drops of essential oil (not included) directly into the Water Tank.

4. Replace the Water Tank Lid onto the Base. Replace the Outer Cover.

5. Plug the USB End of the Power Cord into any USB port.

6. Power Button Functions:

Left Side – Light:

1st Push = Warm white light

2nd Push = Rotating color

3rd Push = Maintains solid color

4th Push = Turns light off

Right Side – Mist:

1st Push = Continuous mist

2nd Push = Turns mist off

NOTES:

• The unit will automatically stop misting when water level becomes too low or when Outer Cover is removed.

• If the Water Tank is empty, the unit will beep once when pressing the Mist Button.

• Disconnect USB Cable from power source when not in use.