MarbleMist Blue

Directions: Insert the adapter’s connector into the DC jack input under the base of the diffuser. Plug the adapter into the wall outlet. Place the diffuser on a flat, level surface. Remove the external cover, then the internal cover. Pour bottled or tap water (100 mL) into the water tank up to the maximum water level line. Add a few drops of your choice of essential oil (not included) directly into the water tank. Replace the internal cover, then the external cover. Power Button: 1st Push turns on continuous mist and rotating lights. 2nd Push freezes the light color of your choice with continuous misting. 3rd Push restarts the color-changing light cycle and starts the intermittent misting, 30 seconds on and 30 seconds off. 4th Push turns the lighting off with continuous misting. 5th Push will turn the unit off completely. The unit will automatically turn off when water level becomes too low. Use only 100% natural essential oil. Care and Maintenance: Always remove the power cord before cleaning. When not in use, empty the water from the side of the tank. Do not empty water near the air outlet. Dry with a soft cloth to avoid mineral buildup. To remove possible buildup, gently use a cotton swab dipped in rubbing alcohol or white vinegar to wipe out the inside. Note: The vibration plate should not come in contact with any hard or sharp objects. Do not use strong cleaning agents. Essential oil should not come in contact with the exterior surface of the unit.