Directions: Please read these instructions carefully before assembling and/or operating. Keep instructions for future reference.
Features and Functions:
Based on the nature of aromatherapy, a gentle mist is produced by ultrasonic vibrations. The mister displays a color-cycling sequence of light, creating a soothing atmosphere. Adding
essential or fragrant oil further expands the unit’s appeal, emitting a fragrant aroma. If the water level gets too low, the water level sensor
will shut off automatically to prevent damage.
Assembly and Operating Instructions:
Place the mister on a steady, level surface.
CONDENSATION WILL BE CREATED, PLACE UNIT
ON A MOISTURE-RESISTANT SURFACE.
1. Fill the mister with tap water just below
the line (inside base), equal to ¾ cup
of tap water. DO NOT USE DISTILLED
WATER. Do not fill to the top.
2. Place the vapor insert onto the top of the
base.
3. Put the dome top on the vapor insert. The
directional mist adjuster fits in the
dome. Rotate to direct mist.
4. Plug the adapter into the mister base.
5. Plug the adapter into the wall outlet.
Press right button ONCE to turn on mist.
Press left button ONCE to turn on lights.
Press left button THREE TIMES to turn
lights off.
The unit will automatically shut off when the
water level is too low. Refill with tap water
as needed for unit to operate. It is normal
for temperature of the water and adapter to increase while in operation.
6. Unplug unit when not in use.
Aromatherapy:
Place a few drops of essential or fragrant oil
directly into the water. Rinse unit (see below)
once a week to avoid buildup.
Care & Maintenance:
1. Replace water and clean frequently.
NOTE: Only use tap or bottled mineral
water.
2. Any accumulated buildup on the misting
disk will diminish the amount of mist
produced.
3. Unplug the unit while making any
adjustments.
4. Do not operate without water.
5. Place on a waterproof surface.
6. Clean unit weekly. To clean, unplug the
base from the power source. Rinse
base with hot tap water at least three
times to ensure buildup is removed.
Allow unit to dry thoroughly.
Troubleshooting: Nothing happens when you plug in the mister. Check the connection and the power source. The water level must be below the red cap. Ensure that the unit is turned out by cycling through the 4 button push options. There is no misting: Check the water level. Units shuts off automatically when the water is low. Any accumulated buildup on the misting disk will diminish the amount of mist produced. Follow Cleaning Instructions.
WARNING:
Do not operate without water.
All electrical appliances should be kept out of reach of children and pets.
NOTE: You may see a flash inside the unit when
you initially plug it in. This is the LED lights
inside, not a spark or malfunction.
Item Added to Cart
Currently cart is empty
