White Aromapod Ultrasonic Diffuser

Directions: Only use the power cord that is supplied with the unit. Always remove the power cord before cleaning. Essential oil should not come in contact with the exterior surface of the unit. Use only 100% pure essential oil. Do not use fragrance oils. TO CLEAN: * SpaRoom® KLENZOR™ tablets may be used to renew diffuser to like-new condition. Remove Top Cover. Empty the water from the Drainage Outlet on the side of the Water Tank. The vibration plate inside the bottom of the unit should not come in contact with any hard or sharp objects. To remove possible buildup, gently use a cotton swab dipped in white vinegar to wipe out the inside. Dry with a soft cloth to avoid mineral buildup. Do not use strong cleaning agents.

Instructions for Use: 1. Remove Top Cover from Base (FIG 1). 2. Add cool tap water into the Water Tank up to the Max Fill Line. (FIG 2). 3. Add 2-3 drops of your choice of 100% pure essential oil (not included) into the water tank (FIG 3). 4. Insert the USB cord into the socket of the main body base. Plug the power supply into the USB port on your device. 5. Replace the Top Cover (FIG 4). 6. Press the Mist/Power button once for up to 3 hours of continuous mist. Press the Mist/Power button again to turn the unit off (FIG 5). If there is no water in the tank, pressing the Mist button will cause the Power Indicator Light to blink 3 times to remind you to add water. The unit will not work without water. 7. The unit will automatically shut off when water level becomes too low.